All products Decision layer Data collection Trip Counting Module
Active safety and control
Engine and thermal management

MetaVision Driver monitoring and vehicle camera system

It warns the moment attention drifts.

AI driver monitoring with 4-channel vehicle camera recording

4 × 1080PFull HD camera channels
60Days of recording at most, with up to 512 GB of internal storage
6Driver behaviour classes in one device
SOSPanic button: speed, location and time sent straight to the operator
Skip to end

Highlights

Why MetaVision?

A driver on a night run; his face is scanned and the words “Sometimes one second is enough” appear

AI driver analysis

It notices the moment attention slips

The DMS camera watches the driver. Fatigue and drowsiness, distraction, phone use, smoking and an unfastened seatbelt are detected in real time. The moment a violation occurs, the cab speaker gives an audible warning so the driver can correct it straight away.

The AI analysis detects that the driver is smoking and raises an alert

Recording is evidence

The moment is on record

Up to four Full HD cameras record the cab and the vehicle’s surroundings. With up to 512 GB of internal storage, recordings are kept for up to 60 days, so reviews rest on footage rather than accounts.

Infrared DMS camera: phone and seatbelt detection
The MetaVision camera on the dashboard
The MetaVision camera on the dashboard
Four-channel recording
Compact mounting in a passenger car
Compact mounting in a passenger car
Recordings transferred to MetaFMS

Detect · Warn · Record

From the cab to the control room at once

Every violation reaches MetaFMS as an alarm, with its footage, location and vehicle data in the same record. Where there is no mobile signal, recordings wait on the device and are sent once the connection returns.

The smart camera on the dashboard; the steps Detect, Warn, Record and MetaFMS appear in turn

Ready for the field

Before the accident happens.

Let’s start with pilot vehicles and plan installation and reporting around your site together.

Risk often starts in the cab

According to 2025 data from TÜİK, the Turkish Statistical Institute, 90.60% of the faults behind road accidents in Türkiye were driver faults. Fatigue, a phone or an unfastened seat belt happen in the cab, and the control room usually hears about them after the event.

A driver in the cab on a night run

Fatigue and drowsiness

Fatigue slows the driver's reactions and erodes driving safety. The risk grows on long shifts and night runs.

With MetaVisionDriver fatigue monitoring runs on the DMS camera, which detects drowsiness in real time and warns the driver at once through the cab speaker.

Phone use detected by the infrared DMS camera

Phones and distraction

Every glance at a screen is a moment with eyes off the road. Phone use and distraction create critical risks while driving.

With MetaVisionAI-based driver distraction detection covers phone use too; an audible warning is given and the event is recorded.

Smoking detected by the AI analysis

Rules nobody can see from the office

Seat belts, smoking and similar rules stay inside the cab. Tracking these behaviours centrally is hard.

With MetaVisionSeat belt violation detection and smoking alerts are built in, and every violation reaches MetaFMS as an alarm.

Four-channel recording view

An event with no footage

Without a recording of what happened inside and around the vehicle, an event cannot be assessed properly afterwards. The review rests on accounts, not evidence.

With MetaVisionUp to four Full HD cameras record the cab and the vehicle’s surroundings, so each event is reviewed with its footage.

Scattered data

When driver behaviour, vehicle data and location sit in separate systems, an event cannot be analysed as a whole.

With MetaVisionDriver events, location and vehicle data meet in the same MetaFMS record, so each event can be reviewed as a whole.

Recordings being transferred to MetaFMS

Areas without coverage

Where there is no mobile signal, location and operational data can be lost, leaving gaps in fleet tracking.

With MetaVisionIn areas without signal, location and recordings are kept on the device and sent to MetaFMS once the connection returns.

From the field: one fleet, one period

In one fleet, 17,447 violations were recorded over a single period. More than half of them were phone use while driving.

17,447

  • Phone use9,094
  • Seat belt4,330
  • Smoking2,036
  • Fatigue and drowsiness1,247
  • Distraction740

One fleet, one period: real data from the MetaVision panel. Fleet and driver details are not shared, and the breakdown varies by fleet and period.

Detect, warn, record, alert

The analysis runs in the vehicle and the warning goes to the driver first. The alarm, video and vehicle data then reach MetaFMS; without coverage, records wait on the device.

Violation detected: warning in the cab
  1. The driver’s face is scanned in the cab

    Analysis in the cab

    The DMS camera watches the driver. AI detects fatigue and drowsiness, distraction, phone use, smoking and an unfastened seat belt in real time. The speed limit is monitored too.

  2. Violation detected: warning in the cab

    Voice warning to the driver

    The moment a violation is detected, the cab speaker gives a voice warning, so the driver can correct it there and then.

  3. Speeding events drop-down list on the live map

    Alarm to MetaFMS

    Every violation is sent to MetaFMS as an alarm. The event's footage, location and vehicle data sit in the same record.

  4. Driver DMS events and the DMS event breakdown donut chart

    Review

    The manager reviews the event with its footage and sees the violation breakdown for each driver, so training and improvement priorities rest on data.

What's in the kit

In passenger cars, the front camera sits in a compact mount that keeps the driver's view clear.

MetaVision — What's in the kit

Driver, footage and vehicle data in one record

Metadiag MetaVision combines DMS and DVR in one kit and works as the vehicle's black box, using both footage and CAN data. It fits passenger cars, heavy goods vehicles and construction machinery.

Panel screens are from the MetaFMS test panel running on simulated data; driver names and addresses have been blurred. In the in-cab footage, personal data (driver faces and names) has been blurred.

Where it works

A driver at the wheel of a truck at night

Logistics and haulage

On a long haul, a driver reaching for the phone hears a voice warning, and the event reaches the dashboard with its video.

An articulated city bus on a highway in Istanbul

Passenger transport

On a night run, fatigue is detected and the driver is warned. In an emergency, one press sends speed, location and time to the operator.

An excavator loads a tipper truck on a construction site, with a wheel loader and a concrete mixer nearby

Construction and earthworks

On site, a missing seat belt is flagged to the driver at once, and the HSE team takes the violation breakdown from the dashboard.

Trucks and excavators working in an open pit, aerial view

Mines and quarries

In a pit with no signal, recordings wait on the device and are transferred to MetaFMS once the vehicle is back in coverage.

Concrete silos and a stair tower at a plant

Concrete and cement

The mixer driver's behaviour is followed on the same dashboard as the trip counting data.

A truck on a highway, marked by the road camera analysis

Public and municipal fleets

Post-event reviews rest on footage and vehicle data, and only authorised users can access the footage.

Technical specifications

Recording (DVR)

Camera channels
4 channels, 1080P Full HD
Internal storage
Up to 512 GB
Recording time
Up to 60 days
Event record
Footage, CAN data and location in one record

Driver analysis (DMS)

Detected behaviours
Fatigue and drowsiness, distraction, phone use, smoking, speed limit, seat belt
Additional alert
Driver not detected (camera covered, turned away or faulty)
Driver warning
Voice warning in the cab (speaker)
Dashboard notification
Alarm to MetaFMS
Driver identification
Recognises who is driving

Vehicle data (CAN)

Data read
Instant fuel consumption, engine speed, engine temperature, operating hours, fault codes, total distance, payload weight

Connectivity and security

Location and connectivity
GPS + LTE antenna
Without coverage
Records are kept on the device and sent to MetaFMS automatically once connected
Emergency
Panic button: speed, location and time sent straight to the authorised operator
Access to footage
Role-based, in MetaFMS
Software updates
Remote, over the internet

Application

Vehicle types
Passenger cars, heavy goods vehicles, construction machinery
Kit contents
DVR module, DMS camera, recording camera, speaker, GPS + LTE antenna, panic button
Dashboard
MetaFMS (for alarms, video viewing and analysis)

The CAN data available depends on the vehicle's CAN structure. Recording time varies with storage capacity, the number of cameras and recording settings.

Certificates

Certificates are issued per product and model. Select one to view it.

Certificates were issued under the company's previous title, Metadiag Bilişim Teknoloji Sanayi ve Ticaret Ltd. Şti.

Part of the ecosystem

MetaVision's alarms, live and past footage, emergency card and driver analysis breakdown come together on the live map in MetaFMS. Where MetaDamper is fitted to the same vehicle, driver behaviour and tipping events are followed side by side in the same panel. MetaVision carries its own GPS and CAN capability, and on vehicles that do not need a camera, MetaTrack brings location and CAN data to the same dashboard.

Frequently asked questions

What exactly does MetaVision do?

It detects, warns, records and alerts. As a driver monitoring system, it analyses driver behaviour with AI, gives the driver a voice warning when a violation occurs, records the event on vehicle CCTV together with CAN data, and sends an alarm to MetaFMS. Responsibility for safe driving stays with the driver.

Does it work without MetaFMS?

Partly. The in-cab voice warning and recording run on the device. Receiving alarms, viewing live and past footage and seeing the driver analysis all require MetaFMS fleet management software.

What happens where there is no signal?

Location and recordings are kept on the device. Once a connection is available, they are transferred to MetaFMS automatically and in full.

How long are recordings kept?

With up to 512 GB of internal storage, the device keeps up to 60 days of recordings. The exact time depends on the number of cameras and recording settings. How long footage is retained is decided by the vehicle operator under applicable data protection law.

What if the driver covers or turns the camera?

The system raises a driver-not-detected alert. If the camera is covered, turned away or faulty, the vehicle appears on a separate list in MetaFMS, so the manager can see it centrally.

What about data protection under KVKK and the GDPR?

In MetaFMS, footage is available only to users who have been granted access. Defining the purpose and legal basis for recording, informing drivers about it and setting retention periods are the vehicle operator's responsibility.

Which vehicles can it be fitted to?

Passenger cars, heavy goods vehicles and construction machinery. In passenger cars, the front camera sits in a compact mount that keeps the driver's view clear. The CAN data available depends on the vehicle's CAN structure. On vehicles that do not need a camera, MetaTrack vehicle tracking brings location and CAN data to the same panel.

How many camera channels does MetaVision support?

MetaVision supports 4 camera channels at 1080P Full HD resolution. The cameras record both the cab and the vehicle's surroundings; recording time depends on the number of cameras and recording settings.

MetaVision detects, warns and records; it does not replace the driver's attention and responsibility. The vehicle operator must inform drivers about video and data recording and comply with applicable data protection law.

MetaVision

Let's start with a few pilot vehicles in your fleet

We plan the survey, installation and reporting around your site. Our team reviews your vehicles and recommends the right configuration.

Products of interest