Regulations/ Tipper safety systems in Turkish public tenders (DMO and KGM)
Tipper safety systems in Turkish public tenders: what the DMO and KGM specifications ask for
A tipper safety system is not required by statute; it is asked for in public procurement specifications. The tipper truck specification of the Turkish State Supply Office (DMO) contains explicit clauses on it. A more detailed clause, stated to belong to purchases by the General Directorate of Highways (KGM), appears as an example in our product catalogue; its official copy has not yet been verified. These requirements apply only to Turkish public procurement.
Two clauses under the safety heading of the DMO specification relate directly to the tipper body. The KGM specification example is shown with a separate label.
Public tender specification
DMO clause 1.2.4.1: speed limit with the body raised and body lock while driving
“Vehicles shall have a system that limits the vehicle's road speed to no more than 10 km/h when the body is not fully lowered, and a system that prevents the body from being raised while the vehicle is travelling above 10 km/h.”
The clause asks for two separate functions: limiting vehicle speed to 10 km/h while the body is raised, and preventing the body from being raised while the vehicle is travelling above 10 km/h.
DMO clause 1.2.4.2: audible and visual warning, under-body lighting
“When the PTO is engaged, vehicles shall have an audible (intermittent) and visual warning system and, while the body is raised, an under-body lighting system. (The audible warning (intermittent) shall continue from the moment the body starts to rise until it is lowered.)”
This clause is aimed at warning people around the vehicle rather than at controlling the body; each function should be matched separately before bidding.
Public tender specificationOfficial source not verified
Specification example from our catalogue: KGM “Tipper safety system” clause
Our product catalogue includes, as an example, a specification clause stated to belong to KGM purchases of salt spreaders and snow ploughs. Under this clause each truck has a tipper safety system: side-to-side and front-to-rear slope sensing; a warning and lift inhibit at 6° side slope or more; PTO cut-off above a 45°–55° peak angle; a safe lift angle based on ground slope; automatic lowering above 60°; engine stop on lateral movement above 45°; PTO disabled above 10 km/h and lowering of a body left raised; body and tailgate sensors; and a cab control panel with an LCD of at least 4″ that also shows fault codes. No official copy of the specification could be found in public sources. KGM tender no. 2025/206439, “Tipper Truck, Salt Spreader, Front and Side Snow Plough Work”, is on the official record, but it has not been verified that this clause belongs to that tender.
The duty to meet the specification lies with the bidder that signs the contract. These clauses do not create a general obligation for vehicle owners or hauliers.
Specification date
The DMO version reviewed is specification A.24.d dated 25 July 2017; confirm the current version with DMO.
How it is checked
Specification requirements are checked during procurement and delivery, not at the roadside.
DMO inspection during production
If it considers it necessary, DMO may inspect production at the manufacturer's plant from the start of production of the ordered bodies until the end of delivery; the manufacturer may also request interim inspections in writing (clause 1.4).
Registration documents must be ready at inspection
The body manufacturer must obtain the TSE individual vehicle conformity certificate or the vehicle type-approval certificate needed for registration and have it ready at inspection (clause 1.2.1.6).
MetaDamper's Standard Module, Wireless Sensors and 4.3″ Display packs together are built for the slope sensing, lift inhibit, automatic lowering, travel protection, sensor and display functions listed in the catalogue specification example. Motion control (the 4.3″ display or the Motion Control Module) meets the function in DMO clause 1.2.4.1 that prevents the body from being raised while driving. The product's TÜR experience certificate and domestic goods certificates are listed on the Certificates page.
For limiting vehicle speed to 10 km/h with the body raised (the first function in clause 1.2.4.1) and for the warning and lighting functions in clause 1.2.4.2, talk to our technical team before bidding.
Frequently asked questions
Is a tipper safety system required by law in Türkiye?
Our research found no statute or regulation that makes a tipper safety system generally mandatory. Such systems are asked for in public procurement specifications and apply only to purchases under those specifications. Occupational health and safety duties on construction and mining sites apply separately.
What does DMO clause 1.2.4.1 require?
It requires a system that limits road speed to 10 km/h while the body is not fully lowered, and a system that prevents the body from being raised while the vehicle is travelling above 10 km/h. MetaDamper travel protection (with the 4.3″ display or the Motion Control Module) meets the second function: it prevents the body from rising while the vehicle is moving and lowers a body left raised.
Where is the KGM tipper safety system clause published?
No official copy of this clause could be found in public sources; the text appears as an example in our product catalogue. When preparing a bid, always work from the technical specification of the tender concerned on EKAP, the Turkish e-procurement platform.
How is compliance with the specification checked before bidding?
For each tender, our technical team matches the specification clauses one by one before the bid. MetaDamper's certificates are listed on the Certificates page.
Tipper safety systems in Turkish public tenders (DMO and KGM)
Let's start with a few pilot vehicles in your fleet
Tell us about your fleet, the loads you carry and any tender specification you work to, and we will work out the right product set with you.
We would like to use analytics and advertising cookies to understand how the site is used and to measure our ads. If you decline, only essential cookies are used.Cookie policy